Wednesday, 30 May 2012

Messerschmitt KR175

The Messerschmitt KR175 balloon car (1953–1955) was the aboriginal car congenital by Messerschmitt beneath its 1952 acceding with Fritz Fend. In concept, although not in absolute design, it was an continued adaptation of the Fend Flitzer invalid carriage. Approximately 15,000 were congenital afore it was replaced by the Messerschmitt KR200 in 1956

History


Messerschmitt, briefly not accustomed to accomplish aircraft, had angry its assets to bearing added products. In 1952, Fend approached Messerschmitt with the abstraction of accomplishment baby motor vehicles.5 These were based on his Fend Flitzer invalid carriage.6

The aboriginal of Fend's cars to access assembly at Messerschmitt's Regensburg branch was the KR175.3 The appellation Kabinenroller agency "scooter with cabin".7 While the Messerschmitt name and badge were acclimated on the car, a abstracted company, congenital as Regensburger Stahl- und Metallbau GmbH, was created to accomplish and bazaar the vehicle.3

There were several problems with the aboriginal KR175s to be built, consistent in 70 architecture modifications amid the alpha of assembly in February 1953 and June of the aforementioned year.4

The KR200 was developed from the KR175 and replaced it in 1955

Features


The KR175 accustomed several appearance different to the Kabinenroller platform. Externally, the attenuated body, the cellophane acrylic balloon awning and low attitude were a part of the added accessible features.

Messerschmitt K175 1954

Tandem seating

The attenuated body, and agnate low aboveboard area, was accomplished with bike seating, which aswell accustomed the physique to abate like an aircraft fuselage, aural a applied length.citation needed The foreground fenders did not accept caster cutouts.6

Bubble canopy

Entry to the KR175 was through a awning aperture hinged on the appropriate ancillary of the vehicle. The aperture included all the windows (windshield on both models, window frames and acrylic balloon on bankrupt version) and the anatomy in which they were set, extending from the appropriate ancillary of the monocoque tub to the left.

The balloon went absolutely about the cockpit with cutouts for window frames at the abandon and a small, collapsed bottle windshield at the front. The windshield wiper was manually operated.6

Engine and transmission

The KR175 ran on a 173 cc (10.6 cu in) Fichtel & Sachs air-cooled individual butt two-stroke engine positioned in foreground of the rear wheel,2 just abaft the passenger's seat.6 The engine was started with a cull braiding as standard, but there was an advantage of an electric starter. The manual was a sequential, positive-stop blazon with four speeds and no synchronization nor about-face gear.2

Mivalino controls, agnate to those of the KR175

Controls

The KR175 was steered with tubular animate handlebars. Operated by blame rather than by turning,clarification needed the council bar was affiliated anon to the clue rods of the foreground wheels, accouterment an acutely absolute acknowledgment best ill-fitted to small, abstinent inputs.3 The gearshift lever, on the appropriate ancillary of the cockpit, had a accessory batten on it which operated the clutch.2 The burke was operated by a twist-grip on the larboard handlebar.3 The footbrake pedal, which was the alone pedal in the car, operated brakes on all three auto mechanically, application cables. The handbrake batten operated similarly.

Mi-Val Mivalino

Italian motorcycle architect Metalmeccanica Italiana Valtrompio s.p.a., makers of the cast Mi-Val, accumulated KR175s in Brescia, Italy, application apparatus alien from Messerschmitt but with their own 172 cc (10.5 cu in) two-stroke engine installed. These cars were awash as the Mi-Val Mivalino

Data


Configuration: mid (rear) engine, rear drive

Seating, front/rear: 1/1

Weather protection: balloon awning coupe

Heating/air conditioning: none/none

Engine type: Fichtel & Sachs, 1 cylinder, 2 stroke

Displacement: 174 cc

Bore x stroke— 62 x 58 mm

Compression: 6.8:1

Power: 6.7 kW (9.0 hp) @ 5,250 rpm

Cooling: air, with fan

Starter: bang starter, after Dynastart

Drive: 4 acceleration and alternation to individual rear wheel

Brakes: 3 wheel

Wheel size: 4.00 by 8 in

Dimensions (length/width/height) (m): 2.820 m (111.0 in)/1.220 m (48.0 in)/1.200 m (47.2 in)

Wheelbase: 2.030 m (79.9 in)

Track, front/rear: 0.920 m (36.2 in)/0 m.

Weight, empty/full load: 210 kg (460 lb)/360 kg (790 lb).

Fuel consumption: 3.7 L/100 km (76.3 mpg-imp; 63.6 mpg-US)

Top speed: 80 km/h (50 mph)

Years built: 1953 to 1955

Number built: 15,000 (19,668 from addition source)

Price : DM 2,100.00